Oceanic EOS Regulator

When engineering brought the near complete Oceanic EOS regulator in for conformational testing the results were so astounding, the laboratory stopped testing and performed a complete calibration of all instruments, and in re-testing the EOS was found to have a near effortless inhalation resistive effort on test after test. Perfect.

Comprised of precision-machined components and extensive research and design, the Oceanic EOS regulator has achieved an incredible feat…lifelike breathing. Oceanic’s gifted team of design engineers has included effortless breathing, inhalation effort adjustments, and comfortable second stage swivels and orthodontic mouthpieces into a regulator that you can hold in the palm of your hand. This is far more than just another regulator in the eyes of the Oceanic team, this is a dream come true.

The spring force must be just enough to overcome the difference between downstream air pressure and upstream balance chamber pressure.

The downstream air travels through a hole in the poppet into the balance chamber and applies an "upstream" force just slightly less than the downstream force.

Diver Adjustable Inhalation Effort.
Most downstream demand valve regulators are calibrated during manufacturing to a single, 'middle of the road' operation. Whether finning up current at 100+ feet or merely snorkeling out to the dive site, this factory adjustment may not be optimum for the wide variety of demands we place on our equipment. A simple twist of the adjustment knob enables complete control... Set the inhalation requirement on the Oceanic EOS regulator to near zero when you need ultimate performance, or tune it for greater resistance as conditions or preferences change.

Patented Dynamic Adjustment.
A common objection to adjustable second stages is that divers can't imagine themselves twisting and turning a knob as they descend and ascend through the depths. If inhalation resistance is set near zero at depth, your ascent would require you to manually increase resistance as ambient water pressure is reduced to prevent free-flow. Taking another stride beyond common second stage engineering, Oceanic designed a patented DYNAMIC ADJUSTMENT feature into the heart of the Oceanic EOS regulator. This mechanically balanced valve maintains your preferred breathing resistance throughout the dive. Set it once and the EOS reg automatically adjusts to make breathing as easy at 100 feet as it is at 30 feet - with no additional manual adjustment.

Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch.
Designed to be unobtrusive, yet easily manipulated even with the thickest gloves, the A.V.S. deflector vane found in the Oceanic EOS regulator either diverts airflow from the valve to the mouthpiece, producing effortless venturi-assisted inhalation or creates enough resistance to prevent free flow on the surface.

Stainless Steel Inline Swivel.
Ever notice that nearly every picture you see of a diver, their regulator looks like it’s not the least bit comfortable? The Oceanic EOS regulator features an ergonomically designed stainless steel (no plating) in-line swivel for ultimate comfort.

Computer Optimised Design.
The Oceanic EOS regulator was designed using the latest 3-D computer modeling techniques. This allows us the ability to model and test performance while still in the early stages of development. The EOS’s unique valve, deflector vane and housing design directs airflow from the valve directly to the mouthpiece, producing nearly effortless venturi-assisted inhalation when diving.

Patented Orthodontic Mouthpiece with High-Density Bite Tabs.
To further reduce jaw fatigue, the Oceanic EOS regulator features a patented Orthodontic Mouthpiece, designed to accommodate the natural overbite of the human jaw.

Nitrox Compatible.
The Oceanic EOS FDX-10 Regulator is classified as being suitable for use with Nitrox breathing gas mixtures containing up to 40% oxygen by volume without the need for special preparation, cleaning or component parts.

FDX-10 Over-Balanced Diaphragm First Stage.
Forged from marine-grade brass, the Oceanic FDX-10 1st stage regulator features optimised air paths and angled hose ports for superior performance and comfort when diving. A sealed Balanced Diaphragm design, Enviro Kit and patented DVT (Dry Valve Technology) isolate all internal components from the environment. 2 high pressure and 4 low pressure ports allow convenient and comfortable hose routing.

The Oceanic FDX-10 high performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases. The center “pads” that the diaphragms act against are different sizes so the working area of the outer environmental diaphragm is larger than the working area of the inner diaphragm. As depth increases, more pressure is applied to the larger surface area of the outer diaphragm than would be applied to the internal diaphragm. The result is superior gas delivery when diving even under the most extreme conditions.

DVT (Dry Valve Technology)
Ever wonder why they call it a "dust cap" and not a water cap? Most dust caps are not designed to keep water from entering your first stage. Regardless of how carefully you may maintain your regulator, water entry is a much more common problem than most divers realise.

DVT is a revolutionary regulator technology designed to automatically eliminate moisture and contaminants from entering your first stage, even if the dust cap is accidentally left off. DVT eliminates corrosion of critical internal components, bacteria, hose deterioration, and damaged gauges and computers.

Oceanic Australia Product Warranty

Oceanic Australia offers product warranty for all Oceanic product purchased in Australia from an Authorised Dealer.

If you purchase your product outside of Australia, it will not be covered by warranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service.

Warranty Period

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings and Analogue Gauges, when purchased from an Authorised Dealer in Australia, under normal recreational use, are provided with a Limited Lifetime Warranty (LLW) to cover against any defects in materials and workmanship. Digital Instrumentation is provided with a 5 year Limited Warranty.

This Warranty also covers free service parts for life for the Regulator and Octo. Obviously some common sense conditions apply.

Those conditions are:

• The product must be registered with Oceanic Australia within 30 days of purchase. This registration should be completed On-Line or by completing and returning the Warranty Registration form provided by your Authorised Oceanic Dealer.
  
  
• Failure to register your product will reduce your warranty status to 1 year, when purchased from an Authorised Oceanic Dealer in Australia, under normal recreational use, and cover against any defects in materials and workmanship. The free service parts for life will not be applicable in this case.
  
  
• All products must be serviced annually by an authorised Oceanic Service Technician. This agreement is null and void if such regular annual service is not performed.
  
  
• Oceanic Australia and your authorised Oceanic Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in Product Specific Warranties later in this document.
  
  
• All labour fees included in annual service are the responsibility of the owner of the product serviced.
  
  
• This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Oceanic Australia to perform such service.
  
  
• The warranty is non transferable and extends to the original purchaser only. It is void if the equipment was purchased from anyone other than an Authorised Oceanic Dealer in Australia.
  
  
• Normal wear and tear as determined by age and usage is excluded from the Oceanic Lifetime Warranty.

To maintain this Lifetime Warranty, you must show proof of purchase and proof of authorised annual service. If returned for service, your product should be accompanied by a copy of the original sales receipt.

Note: Not every business that advertises Oceanic, Aeris or Hollis product is an Authorised Dealer. Please visit Locate A Dealer to verify that the merchant is an Authorised Dealer before any purchase.